How to remove the Module from the sign?
Each Module has two mounting points. The mounting points are located in the center of the Module. The first is approximately two inches from the top, and the second is the same distance from the bottom
Identify the first mounting point, insert a 3mm hex key, and make a half turn to the left.
Identify the second point and repeat the instructions above.
With the hex tool still in the slot, gently remove the Module from the sign, then disconnect the power and data cables.
To reconnect the Module, ensure the arrow on the back of the Module is pointing upwards,
- Reconnected the power and data cables
- Reattached the modules to the sign
- Identify to points and use to 3mm hex key to lock the modules by making a half turn to the right